UAV / Drones
Drone structures and casings
Arms, camera mounts and electronics housings in ASA and Nylon, weather-resistant.
3D printing · Engineering · Robotics
Precision manufacturing for projects that matter
Functional prototypes, technical parts and material consulting for robotics, drone and mechatronics teams. Fast iteration, real tolerances.
- Tolerance
- ± 0.1 mm
- Lead time
- 24–72 h
- Technical materials
- 5+
Services
Manufacturing capabilities
We print parts that work under load, vibration and weather.
01 / 03
Functional prototyping
Fast iterations with complex geometries. From CAD to part in hours, not weeks.
- 24h iteration
- Complex geometries
- Mechanical validation
02 / 03
Technical robotics parts
Mounts, gears, chassis and enclosures with real assembly tolerances and mechanical strength.
- ± 0.1 mm tolerance
- High stiffness
- Industrial finish
03 / 03
Material consulting
We help you choose the right filament based on thermal, chemical, mechanical and regulatory loads.
- Technical analysis
- Datasheets
- Recommendations
Materials
Technical filaments in stock
Every material has its place. We guide you based on the end use of your part.
PLA
01Fast prototypes and geometric validation models.
Easy to printHigh detailLow cost
PLA+
02Models with better mechanical and thermal resistance than standard PLA, without printing complications.
ResistantThermalEasy to print
LW-PLA-HT
03Ideal for fixed-wing drones, lightweight due to lower density. Resistant to high temperatures, doesn't deform with engine heat or direct sunlight.
EngineeringLightweightThermal
PETG
04Parts with mechanical strength and impact resistance, occasional moisture contact.
StrongToughVersatile
TPU
05Seals, gaskets, dampers and parts that require flexibility or vibration absorption.
FlexibleAnti-vibrationShore A 95
ASA
06Outdoor components with UV and weather resistance. Ideal for drones and casings.
OutdoorUV stableHigh temp
PA6 (Nylon)
07Gears, bushings and structural parts with low friction and high mechanical strength.
High strengthLow frictionEngineering
Use cases
Where printing meets the field
We work with teams that need real parts, not decorative ones.
Robotics
Arms and end-effectors
Custom grippers, soft TPU fingers and servo mounts with assembly tolerances.
Electronics
Technical enclosures
PCB boxes with snap fits, cable exits and DIN rail mounting.
Manufacturing
Jigs, fixtures and templates
Assembly templates, calibration mounts and custom tools for the production line.
Process
From file to part, in four steps
Transparent, fast and with technical advice at every stage.
01→Design / file
We receive your STL, STEP or reference. If needed, we help with DFM tweaks.
02→Material selection
We pick the filament based on load, environment and end use of the part.
03→Printing
We print with calibrated profiles, chamber control and quality monitoring.
04Delivery and support
Delivery in Mexico City or nationwide shipping. Post-delivery support and next iterations.
Why Robotti 3D
We are not a generic print service
Behind every part there is engineering judgment and experience with technical materials.
Real tolerances
We print with mechanical calibration, not default profiles. Your parts assemble on the first try.
Engineering inside
We understand stress, fatigue and thermal behavior. We tell you when not to print, and when to print.
Technical advice
We review your file, suggest DFM changes and help you get to the right part faster.
Fast iteration
Same-day file changes. Prototyping cycles built for teams that move fast.
Quote your project
Tell us what you're building
We respond in under 24h with a clear technical proposal: material, time and cost.